FCAMPD Amplified RF InGaAs Pin Photodetector

  1. The FCAMPD integrated by broadband InGaAs photodiode and low noise amplifier. The response wavelength of InGaAs PIN photodiode is 1000 to 1650nm. The RF gain of a low noise amplifier is 20~30dB.
  2. FCAMPD can provide the bandwidth of 1GHz, 2.5GHz or customization(maximum 5GHz. Operates on +5V supply voltages. Optical input port is a standard FC(face-contacted) fiber-optic connector. ORF output port is an SMA compatible connector matched by 50-ohm impedance.
  3. ROHS 2.0 certificated.

Attachment


Introduce of FCAMPD InGaAs Pin Photodetector

The FCAMPD is a pin photodetector hybrid integrated by broadband InGaAs photodiode and low noise amplifier. The response wavelength of InGaAs PIN photodiode is 1000 to 1650nm. The RF gain of a low noise amplifier is 20~30dB.

FCAMPD pin photodetector can provide the bandwidth of 1GHz, 2.5GHz, or customization(maximum 5GHz). The module operates on +5V supply voltages. The optical input port is a standard FC(face-contacted) fiber-optic connector. The RF output port is an SMA-compatible connector matched by 50-ohm impedance.

FCAMPD weighs less than 25 grams.

ROHS 2.0 certificated.

Applications of FCAMPD Pin Photodetector

Radar Information Processing

Electronic Warfare

Antenna Measurement

Features of FCAMPD Pin Photodetector

Wide Bandwidth

Incorporated Bias-T

O/E Hybrid Integrated

High Gain, Low Noise, Broadband

SMA Connector

Product Selection

Typical & Absolute Maximum Rating
Parameter Sym. Typ Rating Unit
Storage temperature range TSTG -45 ~ +85 -55 ~ +100
Operating case temperature range TC 25 -40 ~ +70
Bias Voltage VR 5 +4.75 ~ +5.25 V
Optical Input Power Pin 0 5 dBm
Burn-out Optical Power PB 13 dBm
Lead soldering temperature Tp 280(10s) 330(10s)
Electrical / Optical Characteristics ( TC = 22 ± 3 ℃ )
Parameter Sym Test Condition Parameter Values Unit
Wavelength Range λ 1000 ~ 1650 nm
Frequency Range L – Band S – Band
Small Signal Bandwidth f-3dB TC = 22 ± 3℃ 0. 03 ~ 1 0.03 ~ 2.5 GHz
Responsivity Re VR =+5V,  Pin =1mW λ = 1310 nm ≥ 0.85 ≥ 0.85 A/W
λ = 1550 nm ≥ 0.90 ≥ 0.90
Amplitude Flatness A TC =-40~+70 ℃ ≤ ± 1.5 dB
Saturation Optical Power Ps VR = +5 V, λ = 1550 nm 5 dBm
AC Modulated
RF Signal Gain G 30 ±2 20 ±2 dB
Saturation RF Output Power Pout 15 dBm
Output VSWR VSWR ≤ 2
Dark Current ID ≤10 nA
Output Impedance RL 50 Ω

Typical Response Curves

1 2
Fig . 1 L- Band FCAMPD InGaAs Photodetector Frequency Response

2 2
Fig . 2 S-Band FCAMPD InGaAs Photodetector Frequency Response

3 1
Fig . 3 C- Band FCAMPD InGaAs Photodetector Frequency Response


Dimension and Pins ( Unit: mm[inch] ) 

1328234288541487105
FCAMPD Amplified RF InGaAs Pin Photodetector 18

Optical Connector:FC(face-contacted) fiber-optic connector

RF Connector:SMA

Ordering Information

1328234675268898818
FCAMPD Amplified RF InGaAs Pin Photodetector 19

Sheet 1:

CodeAnalog Bandwidth
L0.03 ~ 1 GHz
S0.03 ~ 2.5 GHz
CMCustomization ( ≦ 5GHz )

Precautions

  1. The fiber bending radius no less than 20 mm for avoiding fiber damaged.
  2. Be sure the fiber coupling facet is clean before connecting it to Opto-circuit.
  3. Suitable ESD protection is required in storage, transportation and use.

NEON is a supplier of highly engineered commercial and industrial off-the-shelf or customized modules designed for today’s high-speed optical communication network infrastructures and leading-edge defense systems.

We are happy to provide you with commercial services. If you have any questions or needs about high-speed photodetectors, please feel free to contact us.